Xtramus NuStreams-P6GW V1.0 - Manual (Page 13)

13
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
3. Hardware Installation of NuStreams-P6GW
NuStreams-P6GW can perform tests on Residential Gateway (Broadband Router), Switch, or
Residential Gateway + Switch. Each test has its own different test options and parameters.
To perform tests on different DUTs mentioned above, you have to connect your NuStreams-P6GW
differently. Please see the installation structure mentioned in this chapter for more detail information.
3.1. Installation for Residential Gateway (Broadband Router) Test
While performing tests on Residential Gateway (Broadband Router), both WAN and LAN ports of the
DUT must be connected to NuStreams-P6GW with CAT-5 UTP cables as shown in the figure down below:
If NuStreams-P6GW’s WAN/LAN Ports and DUT’s ports are connected via CAT-5 UTP cables correctly,
the Link/ACT LEDs located on NuStreams-P6GW’s LAN Port Status LED will be ON accordingly.