Xtramus NuStreams-P6GW V1.0 - Manual (Page 15)

15
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
3.3. Installation for Residential Gateway (Broadband Router) + Switch Test
While performing tests on Residential Gateway (Broadband Router) + Switch, both WAN and LAN
ports of the DUT must be connected to NuStreams-P6GW with CAT-5 UTP cables as the installation
structure when performing tests on Residential Gateway (Broadband Router) as shown in the figure
down below:
Test options for Residential Gateway (Residential Router) + Switch and Residential Gateway
(Residential Router) are very similar, with minor differences listed in the table down below:
DUT Type Residential Gateway + Switch Residential Gateway
LAN Port Select
✓ ✘
Flow Control ✓ ✘
If NuStreams-P6GW’s WAN/LAN Ports and DUT’s ports are connected via CAT-5 UTP cables correctly,
the Link/ACT LEDs located on NuStreams-P6GW’s LAN Port Status LED will be ON accordingly.