Artesyn MVME55006E Single Board Computer Installation and Use (July 2014) - Manual (Page 119)

Appendix A
MVME55006E Single Board Computer Installation and Use (6806800A37J) 119
A
Specifications
A.1 Power Requirements
In its standard configuration, the MVME5500 requires +5V, +12V, and
–12V for operation. On-board converters supply the processor core voltage, +3.3V, +1.5V,
+1.8V, and +2.5V.
A.1.1 Supply Current Requirements
Table A-1 provides an estimate of the typical and maximum current required from each of the
input supply voltages.
In a 3-row chassis, PMC current should be limited to 19.8 watts (total of both PMC slots). In a 5-
row chassis, PMC current should be limited to 46.2 watts (total of both PMC slots).
A.2 Environmental Specifications
Table A-2 lists the environmental specifications, along with the board dimensions.
Table A-1 Power Requirements
Model Power +5V ± 5%
MVME5500-0163 Typical: 6.7 A
Maximum: 8.0 A
MVME5500-0163 with memory mezzanine Typical: 7.5A
Maximum: 9.0 A
MVME5500-0163 with IPMC712/761 Typical: 7.60 A
Maximum: 9.2 A
Table A-2 MVME5500 Specifications
Characteristics Specifications
Operating Temperature 0° to +55° C (forced air cooling required)
400 LFM (linear feet per minute) of forced air cooling is
recommended for operation in the upper temperature range.
Storage Temperature –40° to 70° C