Summary of changes, About this manual – Artesyn MVME55006E Single Board Computer Installation and Use (July 2014) User Manual
Page 17
About this Manual
MVME55006E Single Board Computer Installation and Use (6806800A37J)
17
Summary of Changes
This manual has been revised and replaces all prior editions.
Date
Change
Replaces
January 2007
Default setting for J102 - J110 is [1-2] (see
6806800A37A
February 2007
Default setting for J32 is [1-2]
Default setting for J28 is [1-2}
PMC Mode for J28 and J32 is factory default
P2 PMC 2 I/O mode for J102-J110 is factory default
P2 IPMC I/O is [2-3]
See
6806800A37B
March 2008
Updated to Emerson style standards.
6806800A37C
October 2008
Updated
to correctly identify the
default setting for Jumpers J28, J32 as PMC mode by putting
brackets around 1-2 on both in the Settings column.
6806800A37D
August 2011
Added
6806800A37E
December 2012
Added
6806800A37G
September 2013
Updated
, Intel Ethernet Controller
82544EI replaced with 82545GM.
6806800A37H
July 2014
Re branded to Artesyn template.
6806800A37J