Artesyn MVME55006E Single Board Computer Installation and Use (July 2014) - Manual (Page 84)

Connector Pin Assignments
MVME55006E Single Board Computer Installation and Use (6806800A37J) 84
5.2.1 Asynchronous Serial Port Connector (J1)
An RJ-45 receptacle is located on the front panel of the MVME5500 board to provide the
interface to the COM1 serial port. The pin assignments for this connector are as follows:
5.2.2 Ethernet Connectors (J2)
Dual RJ-45 connectors are located on the front panel of the MVME5500 to provide the
interface to the 10/100/1000BaseTX Ethernet ports. The pin assignments for these connectors
are as follows:
Table 5-1 COM1 Connector (J1) Pin Assignments
Pin Signal
1 DCD
2 RTS
3 GNDC
4 TXD
5 RXD
6 GNDC
7 CTS
8 DTR
Table 5-2 Ethernet Connector (J2) Pin Assignments
Pin 1000BaseTX 10/100BaseT
1 MDIO0_P TD+
2 MDIO0_N TD–
3 MDIO1_P RD+
4 MDIO2_P AC Terminated
5 MDIO2_N AC Terminated
6 MDIO1_N RD–
7 MDIO3_P AC Terminated