Artesyn MVME55006E Single Board Computer Installation and Use (July 2014) - Manual (Page 45)

Hardware Preparation and Installation
MVME55006E Single Board Computer Installation and Use (6806800A37J) 45
If a PMC module is plugged into PMC slot 1, the memory mezzanine card cannot be used
because the PMC module covers the memory mezzanine connector.
1.10.2 Completing the Installation
Verify that hardware is installed and the power/peripheral cables connected are appropriate for
your system configuration.
Replace the chassis or system cover, reconnect the system to the AC or DC power source, and
turn the equipment power on.
1.11 Startup and Operation
This section gives you information about:
 The power-up procedure
 Switches and indicators
Table 1-3 MVME5500 Connectors
Connector Function
J1 COM1 front-panel connector
J2 Dual 1000/100/10BaseT front-panel connectors
J3 IPMC connector
J4 PCI/PMC expansion connector
J5 CPU COP connector
J11, J12, J13, J14 PMC 1 connectors
J18 Boundary scan connector
J21, J22, J23, J24 PMC 2 connectors
J33 COM2 planar connector
P1, P2 VME rear panel connectors
P4 Memory expansion connector