Avery Dennison ALS 380 - Manual (Page 30)

28
3 P
RIOR TO OPERATING
3.2 M
ECHANICAL SETTINGS
ALS
380
3.2.2 Adjusting the braking brushes
Mounting locations of the braking brushes:
– In front of the operator panel support [20A]
– On the vertical guide for the dispensing edge [20B]
➔ Loosen the stud bolt [20C].
➔ Align the braking brush centrally on the label ribbon.
➔ Tighten stud bolts.
[20] Braking brushes
A
C
B