Avery Dennison ALS 380 - Manual (Page 85)

83
7 A
PPENDIX
7.1 F
ACTORY SETTINGS
ALS
380
[79] Factory settings
1) = Function in the configuration menu, see Service Guide
APPL DIR Applicator mode off
APT1 0001 EP applicator dwell time 1 ms
APT2 0001 EP applicator blow time 1 ms
APT3 0000 EP applicator: Delay of the signal air blow: 0 ms
APT4 0001 Applicator operation with APSF – correction of the applicator dwell time: 1 ms
MDIR Turning direction of all motors for right-hand version 1)
OMOD ON Machine goes into online mode (operation-ready) after switch-on 1)
TAND 0000 Distance between product-sensors during tandem operation: 0.0 mm 1)
SLEW 0100 Dispense speed during missing label compensation: 100 m/min 1)
COMP ON Automatic label compensation activated 1)
LABC . 000 Label counter is reset to "0". 1)
APSF OFF Automatic dispensing speed switched off 1)
BAUD NONE
(Settings for data transmission to the serial interface) 1)
PARI NONE
SBIT 0001
NUMB 0001
PRNT STAM: Printer type used: Heat-transfer printer 1)
Function Value Explanation