Avery Dennison ALS 380 - Manual (Page 48)

46
4 O
PERATION
4.2 S
ETTING AND MONITORING
ALS
380
4.2.6 If errors occur
Warning messages
If the machine control system detects a malfunction,
but the labelling operation does not have to be inter-
rupted:
– A warning message appears on the LED-indicator
of the operator panel.
– A warning message is displayed in the format
W_nn:
W stands for warning,
nn is a two-digit numerical code.
– An electronic signal is issued at the same time. The
signal can be further processed by an external con-
trol system.
– For an explanation of the warning messages and
notes on fault elimination, see chapter Operational
malfunctions.
Example [50]:
– The current labelling speed is too high.
– The warning message W__4 appears on the opera-
tor panel.
– An electronic signal is sent to the system control.
– The system control issues an additional warning
tone.
[50] Example: The warning message W__4 is displayed on the op-
erator panel