Scanner button options, Scanner button options -19, 19 scanner button options – Datalogic Scanning MAGELLAN 8500 User Manual
Page 125
Advertising
Product Reference Guide
6-19
Scanner Button Options
Configure the scanner volume button to one of the following modes of
operation:
•
Enable all functions: Volume, tone, diagnostics and reset.
•
Enable only volume, tone and reset.
•
Enable reset only.
•
Disable all button functions
To set the desired Scanner Button Option:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCANNER BUTTON OPTION = ENABLE ALL FUNCTIONS
SCANNER BUTTON OPTION = ENABLE ONLY VOLUME/TONE/RESET
Advertising