Datalogic Scanning MAGELLAN 8500 - Manual (Page 306)

6-200 Magellan ® 8500 Scanner
Code 128 Enable
Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 = DISABLE
CODE 128 = ENABLE