Datalogic Scanning MAGELLAN 8500 - Manual (Page 273)

Product Reference Guide 6-167
RSS-14 Enable
Enables/disables the ability of the scanner to decode RSS-14 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS-14 = DISABLE
RSS-14 = ENABLE
NOTE
This value-added feature is a factory-programmed option. Contact your
dealer for information about upgrading your system to include this advanced
capability.