Datalogic Scanning MAGELLAN 8500 - Manual (Page 358)

6-252 Magellan ® 8500 Scanner
MSI/Plessey Check Character Transmission
Enables/disables transmission of optional MSI/Plessey check characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = DISABLE
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = ENABLE
NOTE
This feature applies only when MSI/Plessey Check Character Calcu-
lation is enabled. This item is ignored when the advanced feature, Full
Label Edit, is enabled.