Datalogic Scanning MAGELLAN 8500 - Manual (Page 223)

Product Reference Guide 6-117
UPC/EAN AIM ID
This feature enables/disables transmission of the UPC/EAN AIM symbol-
ogy identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC/EAN AIM ID = DISABLE
UPC/EAN AIM ID = ENABLE