Datalogic Scanning MAGELLAN 8500 - Manual (Page 309)

Product Reference Guide 6-203
Code 128 AIM ID
This feature enables/disables transmission of the Code 128 AIM symbol-
ogy identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 AIM ID = DISABLE
CODE 128 AIM ID = ENABLE