Datalogic Scanning MAGELLAN 8500 - Manual (Page 169)

Product Reference Guide 6-63
IBM Features
IBM Interface Options
IBM interfaces offer specific control over interaction with certain devices.
Options for this feature are as follows:
• FULL host interface support — Accepts scanner and scale config-
uration host commands.
• Ignore host interface configuration of scanner and scale —
Ignores all scanner and scale configuration host commands.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
IBM INTERFACE OPTION = FULL HOST INTERFACE SUPPORT
IBM INTERFACE OPTION = IGNORE HOST I/F CONFIG OF SCANNER & SCALE
NOTE
The IBM USB interface provides its own set of options. Refer to the feature,
IBM USB Interface Options, in this chapter.