Becker revo.2 - Manual (Page 107)

107
TELEPHONE MODE >>>
> D
> GB
> F
> I
> PL
Telephone mode If your navigation device has an
integrated Bluetooth® interface, you can
connect it to a mobile phone equipped
with Bluetooth® wireless technology.
Your Navigation device can then be used
as a very comfortable hands-free unit. Calling up the telephone mode
(only selected models)
You can call the telephone mode from
the main menu.
> To call the telephone mode, press the
Phone button in the main menu.
If Bluetooth is activated and the
Navigation device is already connected
to a cell phone, the telephone menu is
displayed.
If Bluetooth is not activated upon calling
up the telephone function, the system
will prompt you to switch Bluetooth on.
> Press the Yes button to activate
Bluetooth.
The Navigation device now attempts to
reconnect the cell phone last connected.
When the connection is established, the
telephone menu is displayed after a
short period.
If no cell phone has been connected yet
or if the device last connected is not
available, the following display is
generated.
> Press the Yes button to find Bluetooth
cell phones as described in "Searching
for cell phones" on page 115.
Note:
• For some cell phones equipped with
Bluetooth® wireless technology, it is
possible that some of the functions
described are not available.
• The following descriptions assume
that Bluetooth is activated on the cell
phone. You can find out how to
activate Bluetooth on your cell phone
in the cell phone’s description.
• This function must also be activated
on the mobile phone for an automatic
connection to the mobile phone.