Becker revo.2 - Manual (Page 138)

138
>>> SETTINGS
> D
> GB
> F
> I
> PL
Sounds
You can switch the Navigation device
signal tone on and off. This also includes
the clicking of the touch screen buttons.
> Press the
Tones button.
Depending on the previous setting, the
signal tones are switched on or off.
• Top icon: Tones switched on
• Bottom icon: Tones switched off
Audio Routing (depending on the model)
Once you have connected your navigati-
on system to the audio system of your
vehicle using a suitable cable, (see chap-
ter "Cable for vehicle integration (depen-
ding on model, optional)" on page 22),
you can redirect the sound output of your
navigation system to your vehicle
loudspeakers.
> Press the button Audio Routing
You can choose from the following opti-
ons:
Rear view camera (depending on the
model)
Once you have connected your navigati-
on system to a rear view camera using a
suitable cable, (see "Cable for rear view
camera (depending on the model, optio-
nal)" on page 22) you can display the
image of the rear view camera on your
navigation system.
> Press the button rear view camera
You can choose from the following
options:
Selection Meaning
Phone:
Audio Out When you call via a phone
connected to the device,
the audio output is redi-
rected to the vehicle
loudspeakers
Navigation:
Audio Out The navigation announce-
ments are redirected to
the vehicle loudspeakers
Phone:
Tel-Mute During a phone call, the
audio system of your ve-
hicle is muted
Navigation:
Tel-Mute During an announcement
of your navigation sys-
tem, the audio system of
your vehicle is muted