Becker revo.2 - Manual (Page 130)

130
>>> TOOLS
> D
> GB
> F
> I
> PL
The points will be marked by the letters
A and B.
> Define the direction of blockage for the
road section (from A to B or from B
to A).
Additionally, you can display a list of
permanent blockages already defined on
the map.
Select the desired blocked road by
pressing, in order to set the blockage
times.
The road is currently blocked for all days
of the week, for the whole day
. You
can now set whether or not the road
should be blocked for each day of the
week.
> Press the buttons with the days
on which the road should not be
blocked .
> Press the clock symbol under one of
the days and limit the block of this day
to the required time of the day.
You can set up to two times when the
road shall be blocked.
> Using the buttons set the first peri-
od when the road is to be blocked on
this day.
> Using the buttons set the second
period when the road is to be blocked
on this day if necessary.
Press the Block 24 h button to set a block
for an entire day. Press the Use setting
for... button to also use the block on
other days.
> Press again the back button to
confirm the settings and to exit the
menu.
1 1 1 1
2 2 2 2
Note:
The duration of the blockages can be
defined also in the
Blocked roads menu
in the Navigation settings.
1
2