Connecting from device lists, Connecting a mobile phone, Disconnecting a connected telephone – Becker revo.2 User Manual
Page 116: Telephone mode
116
>>>
TELEPHONE MODE
> D
> GB
> F
> I
> PL
Connecting from device lists
From the device list, you may initiate a
connection to a cell phone. If a cell phone
is already connected, that connection is
automatically disconnected and the new
device is connected.
> Call up the device list.
> Select the cell phone you want in the
list.
The connection is established to the cell
phone selected. With a successful con-
nection, the telephone menu will be dis-
played.
Connecting a mobile phone
You can also attempt to establish a
connection to the Navigation device from
the mobile phone.
If a request is received from a mobile
phone that has not yet been connected,
you will be asked whether you wish to
allow the connection.
> Press the
Yes
button to permit the
connection.
> Enter the displayed password (four
zeros) on the mobile phone.
The connection will be established. With
a successful connection, the telephone
menu will be displayed.
Disconnecting a connected telephone
You may disconnect the connection to a
cell phone currently connected via
Bluetooth.
> Press the
Disconnect
button.
The connection to the cell phone current-
ly connected is disconnected.