Becker revo.2 - Manual (Page 79)

79
NAVIGATION MODE >>>
> D
> GB
> F
> I
> PL
• Announce streets
Using the Announce streets button
you can switch the announcement of
the names of streets into which you
are to turn on (
) or off ( ).
• Announce time of arrival
Using the Announce time of arrival
button you can switch the automatic
announcement of the expected arrival
times on (
) or off ( ).
Setting the Voice
In the
Voice settings window you can set
the voice that will make the navigation
announcements for the language that
has been set.
> In the
Voice guidance settings
window, press the Voice button.
The Voice settings window appears.
> Select the desired voice.
A short example announcement is given.
> Confirm your selection by pressing the
button.
Setting the Volume
With the
Volume settings window, you
can set the standard volume for voice
announcements for each start of the
Navigation device, or switch off voice
announcements completely. Depending
on the situation, this setting can be fitted
into the map display.
> In the
Voice guidance settings
window, press the Volume button.
The Volume settings window appears.
> Select the desired volume with the
and buttons or the scroll
wheel.
> The voice output can be switched off
completely or turned back on by
pressing the Mute button.
> Confirm your settings by pressing the
button.
Notice:
If the announcements of you navigation
device are too loud at high speed, you
should select a quieter interior noise. If
the announcements are too quiet, you
should select a louder interior noise.
Note:
The Announce streets and Announce
time of arrival functions are only
supported by speakers with the TTS
function.
Note:
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).