The voice guidance button, Navigation mode – Becker revo.2 User Manual
Page 78
78
>>>
NAVIGATION MODE
> D
> GB
> F
> I
> PL
The Voice guidance button
In the
Voice guidance
settings window
you can make settings relating to the
voice guidance of the Navigation device.
> Press the
Voice guidance
button in the
settings menu.
The
Voice guidance
settings window
appears.
The following setting options are then
available:
•
Voice
You can select the voice that will make
the navigation announcements for the
language that has been set.
•
Volume
You can select the standard volume for
voice announcements for each start of
the Navigation device, or switch off
voice announcements completely.
•
Interior noise level
With the
Interior noise level
button,
you can adjust the speed-dependent
volume control. To do this, select the
interior volume level suitable for your
vehicle.
With the
Dynamic
setting (selected
models), the interior noise is meas-
ured with the aid of the integrated mi-
crophone, the volume is then
continually adjusted depending on the
noise level.
Notice:
The data transmission via your mobile
phone with Bluetooth may involve addi-
tional costs depending on the mobile
phone contract. Please find out from
your mobile phone provider before acti-
vating. If a connection to the server is
not possible, e.g. because no mobile
phone network is available for a longer
period of time, then the system switch-
es over automatically to TMC until a
connection to the server is possible
again.