Becker revo.2 - Manual (Page 120)

120
>>> TELEPHONE MODE
> D
> GB
> F
> I
> PL
Bluetooth
With the Bluetooth button, you can
switch Bluetooth on or off.
> In the settings menu, press the
Bluetooth button.
Hands free
With the Hands free button, you can
switch the supported telephone func-
tions on or off.
Data connection (model dependent)
With the Data connection button you
can enable your telephone for data
transmission of the Becker Link2Live
services.
Selecting both options simultaneously
can sometimes cause restrictions in
hands free mode or during data trans-
mission.
The prerequisite for using Becker Live
services is Support of Mobile Tethering
via Bluetooth by an Internet-capable
mobile phone and by the network
operator.
With the
Test button you can test whe-
ther your phone or SIM card support
the function. For this purpose, a brief
connection to the Becker Link2Live
server will be established. If you were
able to connect to the server success-
fully, this will be reported back to you
after a few seconds. You can then en-
able the function in the Content Mana-
ger.
If your phone or SIM card do not sup-
port the function, you will get an error
message.
Notice:
The data transmission via your mo-
bile phone with Bluetooth may involve
additional costs depending on the
mobile phone contract. Please find
out from your mobile phone provider
before activating. If a connection to
the server is not possible, e.g. be-
cause no mobile phone network is
available for a longer period of time,
then the system switches over auto-
matically to TMC until a connection to
the server is possible again.