Notice – Becker revo.2 User Manual
Page 153
Advertising
![background image](/files/774289/content/doc153.png)
153
NOTICE
>>>
> D
> GB
> F
> I
> PL
> Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off).
> Remove the cap using a small screwdriver
> Unscrew the housing screws (model dependent) using a small Phillips screwdriver.
> Lever off the rear of the housing using a flat-blade screwdriver (placed at the slits on the sides of the housing).
> Pull out the connector of the battery connecting cable .
> Remove the battery .
Note:
Do not reconnect a unit that you have opened to the power supply.
1
3
3
5
5
Advertising
This manual is related to the following products: