Automatic connection, Automatic call acceptance, Telephone volume – Becker revo.2 User Manual
Page 121: Telephone mode
![background image](/files/774289/content/doc121.png)
121
TELEPHONE MODE
>>>
> D
> GB
> F
> I
> PL
Automatic connection
With the
Auto-connect
button, you can
switch on or off whether an automatic
connection to a cell phone is attempted
after switching on the Navigation device.
> In the settings menu, press the
Auto-
connect
button.
Depending on the previous setting, you
can switch the function on or off.
• Top icon: function on
• Bottom icon: function off
Automatic call acceptance
With this function, you can set whether
or not or after which time an incoming
call is accepted automatically.
> In the settings menu, press the
Auto-
accept call
button.
> Select whether incoming calls will be
accepted automatically after 3, 5 or 10
seconds.
If you select
Off
, the function is switched
off.
The setting currently selected is
indicated with a checkmark (
).
> Confirm your settings by pressing the
back button
.
Telephone volume
With this function, you can set the
volume of the ringtone and the volume
of the call.
> In the settings menu, press the
Volume
button.
> Select the desired volume with the
and
buttons.
> Press the
Mute
button to mute the
volume. By pressing the
button
again, the telephone volume is
switched back on.
> Confirm your settings by pressing the
back button
.