Host commands, Accepting commands from an rs-232 scanner host, Appendix d – Datalogic Scanning 9500 User Manual
Page 425: Contains a par, Fer to appendix d for mor, Appendix d host commands
Product Reference Guide
D-1
Appendix D
Host Commands
Accepting Commands from an RS-232 Scanner
Host
The scanner responds to the following RS-232 commands:
If one of the above commands is received, the scanner will perform the
steps indicated for the command. Host commands for other interfaces is
also available. Contact Tech Support for more details.
COMMAND
ASCII
HEX
COMMENT
Enable Scanner
E
0x45
Disable Scanner
D
0x44
Reset Scanner
R
0x52
Not On File Indication
F
0x46
Long series of beeps
Beep Good Read Tone
B
0x42
Beeps if Good Read Beep is enabled
Force Good Read Tone
0x01
Beeps regardless of beep setting
Bel
0x07
Force Good Read Tone
Identification request
i
0x69
Returns long response
a
Health request
h
0x68
Returns long response
Status request
s
0x73
Returns long response
a. Call Tech Support for information.