Compuprint 6314 - Manual (Page 20)

Compuprint 6314/6414 - User Manual
- Move the print head lock lever (11) to the open position (14) (see Fig. 11).
11
4
14
Fig. 11 – Preliminary steps in loading label roll
- Insert the label roll (3) onto the corresponding roll shaft.
- Move the label roll lock lever (4) to the vertical position. Be careful not to block the movement
of the label roll itself.
- Then pass the free end of the label roll over the first media roller and under the second one, on
which the paper guide (7) is installed, then between the two sides of the paper sensor (see Fig.
12), and finally under the print head group through the label output (12).
20