Ribbons, Thermal features, Emulations – Compuprint 6314 User Manual
Page 9: Hardware options, 2 ribbons, 6 thermal features, 1 emulations 1.6.2 hardware options, 6 thermal features 1.6.1 emulations, 2 hardware options
Compuprint 6314/6414 - User Manual
1.5.2 Ribbons
CPG International offers a range of ribbons that have been specifically engineered to enhance
printing capabilities and to prevent premature print head wear. Therefore, it is strongly
recommended that you use a CPG International Thermal Ribbon in your printer.
1.6 Thermal Features
1.6.1 Emulations
Your thermal printer has the standard CZL emulation which provides direct compatibility with
Zebra printers. In addition, the printer has co-resident: CDL emulation which provides direct
compatibility with Datamax printers and CPL emulation.
1.6.2 Hardware Options
Ask your authorized representative about the following options, which can enhance the versatility
of your printer.
- Fonts
A selection of fonts is available to extend the capabilities of the standard resident fonts.
- Media Cutter
The cutter is used to automatically cut printed media when the media exits the printer.
- Media Catcher Tray
Used with the Media Cutter option to catch the cut media and collect it away from the Media
Cutter Assembly.
- Peel Option
The Peel Option is used to peel adhesive labels from the liner.
- Powered Rewind Option
Used to automatically rewind the printed label and liner back on a roll for use at a later time.
- Network Interface Card (NIC) Servers
Allows the user to attach the printer to a LAN (Local Area Network) rather than attaching it
directly to a host system. NIC servers support Ethernet only. NIC servers are available as an
internally installed, mounted inside the printer with the 10/100Base-T (UTP) connection only.
9