Compuprint 6314 - Manual (Page 44)

Compuprint 6314/6414 - User Manual
3.3.1 Factory Reset Functions
The factory reset function influences the following parameters:
PARAMETERS DEFAUL VALUE
ENABLING AND MODES MENU
SET PRINTER MODE TEAR OFF MODE
PAPER SENSOR MODE TRANSMISSIVE
PRINT METHOD MODE DIRECT THERMAL
POWER UP STATUS ON LINE
POWER UP ACTION NONE
CLOSING HEAD ACTION NONE
PRINTER SETTINGS MENU
VERTICAL OFFSET ADJUSTMENT 0 i
BACKFEED ADJUSTMENT 0 i
FORM LENGTH SELECTION 394 i
MAXIMUM LABEL LENGTHSELECTION 3000 i
MAXIMUM LABEL WIDTH SELECTION 409 i
PRINT SPEED SELECTION 4 inch/sec
SLEW SPEED SELECTION 4 inch/sec
BACKFEED SPEED SELECTION 4 inch/sec
PRINTHEAD HEAT SELECTION 12
CUT CYCLE SELECTION 1
PAPER REWINDER TORQUE 4
RIBBON REWINDER TORQUE 4
HORIZ. OFFSET ADJUSTMENT 0 i
OVERRIDE HEAT PARAM DISABLED
OVERRIDE PRINT SPEED DISABLED
OVERRIDE SLEW SPEED DISABLED
OVERRIDE BACKFEED SPEED DISABLED
OVERRIDE OTHERS PARAM DISABLED
DATAMAX PARAMETERS
VERTICAL OFFSET 210 i
BACKFEED OFFSET 210 i
REFERENCE OFFSET 210 i
ROW OFFSET 0 i
COLUMN OFFSET 0 i
SELECT FINAL CHAR 0D
CONTROL CODES STANDARD CODES
ZEBRA PARAMETERS
SET FORMAT PREFIX 5E
SET CONTROL PREFIX 7E
RESOLUTION MODE NOMINAL RESOLUTION
Table 4 – Parameters influenced by factory reset function
44