Compuprint 6314 - Manual (Page 29)

Compuprint 6314/6414 - User Manual
Fig. 22 – Detail of the paper path in the rewinder guide
Under the Set Printer Mode in the Enabling And Modes Menu, set the printer to Rewinder Mode.
2.3.4 Installing The Cutter (Optional)
- Set the printer power switch to O (OFF).
- Remove the Peel/Tear Assembly, and replace it with the automatic cutter, taking care that the pin
and connector mounted on the side of the printer corresponds to the respective hole and
connector on the cutter itself.
Fig. 23 – The automatic cutter
29