Maximum label length selection, Maximum label width selection, Print speed selection – Compuprint 6314 User Manual
Page 51: Slew speed selection, 4 maximum label length selection, 5 maximum label width selection, 6 print speed selection, 7 slew speed selection
Compuprint 6314/6414 - User Manual
3.5.4 Maximum Label Length Selection
This function sets the maximum length of the label.
Press Enter function key to enter in the MAX LABEL LENGTH sub-menu:
- nnnn i (d,m): select the unit of measurement between i (the values are indicated in hundredths of
an inch), m (the values are indicated in tenths of a millimeter) or d (the values are indicated in
dots) using the Scroll function key. After having chosen the unit of measurement, use the Enter
function key to move to the number you want to modify, scroll through the numerals with the
Scroll function key, and then confirm with the Enter function key up to the last cursor
position, when the menu item appears.
3.5.5 Maximum Label Width Selection
This function sets the maximum width of the label.
Press Enter function key to enter in the MAX LABEL WIDTH sub-menu:
- nnn i (d,m): select the unit of measurement between i (the values are indicated in hundredths of
an inch), m (the values are indicated in tenths of a millimeter) or d (the values are indicated in
dots) using the Scroll function key. After having chosen the unit of measurement, use the Enter
function key to move to the number you want to modify, scroll through the numerals with the
Scroll function key, and then confirm with the Enter function key up to the last cursor
position, when the menu item appears.
3.5.6 Print Speed Selection
This function sets the print speed.
Press Enter function key to enter in the PRINT SPEED sub-menu:
- nn: scroll through the numerals with the Scroll function key, and then confirm with the Enter
function key up to the last cursor position, when the menu item appears. The print speed is
indicated in inches per second (ips). The values range between 2 and 10, in steps of 0.5 ips
(depending on the model that you have).
3.5.7 Slew Speed Selection
This function sets the slew speed.
Press Enter function key to enter in the SLEW SPEED sub-menu:
- nn: scroll through the numerals with the Scroll function key, and then confirm with the Enter
function key up to the last cursor position, when the menu item appears. The slew speed is
indicated in inches per second (ips). The value range is between 2 and 10 in steps of 0.5 ips
(Depending on the model that you have).
51