Compuprint 6314 - Manual (Page 27)

Compuprint 6314/6414 - User Manual
Fig. 20 – Detail of the paper path in the peel-off system
- Manually position the leading edge of the first label to just behind the peel bar of the Peel/Tear
assembly.
- Thread the liner counterclockwise around the rewinder, and insert the liner end into one of the
slots in the rewinder.
- Rotate the rewinder release lever counterclockwise so it forms a ridge along the rewinder (rotate
the rewinder release lever clockwise to remove media.)
- With one hand holding the liner in the slot, rotate the rewinder counterclockwise until the liner is
taut on the rewinder spindle. Verify the leading edge of the first label is still behind the tear bar
of the Peel/Tear assembly.
- Close the print head.
27