Compuprint 6314 - Manual (Page 53)

Compuprint 6314/6414 - User Manual
3.5.13 Horizontal Offset Adjustment
This function sets the horizontal right shift.
Press Enter function key to enter in the HORIZONTAL OFFS sub-menu:
- nnn i (d,m): select the unit of measurement between i (the values are indicated in hundredths of
an inch), m (the values are indicated in tenths of a millimeter) or d (the values are indicated in
dots) using the Scroll function key. After having chosen the unit of measurement, use the Enter
function key to move to the number you want to modify, scroll through the numerals with the
Scroll function key, and then confirm with the Enter function key up to the last cursor
position, when the menu item appears. The horizontal right offset value must be positive.
3.5.14 Set Time And Date
With this function it is possible to set the time and the date for the printer, if an RTC (real time
clock) is installed. In case this function is selected when this device is not present, the display
shows a blinking warning message.
When the system clock is installed, date and time is displayed immediately at power on. Once time
and date are set with this function, the printer updates them then automatically.
Press Enter function key to select the TIME AND DATE submenu:
Press Enter function key to scroll the various items for this function:
- SET YEAR: press Scroll to select the year.
- SET MONTH: press Scroll to select the month, for example 5 for May.
- SET DATE: press Scroll to select the day.
- SET HOUR: press Scroll to select the hour.
- SET MINUTES: press Scroll to select minutes.
Press Enter function key to return to the SET TIME AND DATE submenu.
3.5.15 Override Print Parameters
With this function it is possible to override pre-programmed settings of an existing print job without
the need of reprogramming. The available options are:
- HEAT PARAM
- PRINTSPEED
- SLEW SPEED
- BACKFEED SPEED
- OTHERS PARAM.: includes the emulation parameters
53