Compuprint 6314 - Manual (Page 63)

Compuprint 6314/6414 - User Manual
3.9.5 Run Manual Adjustment
This function enables the printer to calibrate the paper sensor manually. This function is useful in
the case of problematic media (e.g. preprinted labels).
Press Enter function key and follow the instructions shown on the display.
3.9.6 Run Automatic Present Sensor Calibration
This function enables the printer to calibrate, in automatic mode, the present paper sensor. This
function is necessary to allows a correct automatic present sensor adjustment operation.
Press Enter function key to enter in the AUTOMATIC PRES. SENS. CAL. function. At the end of
operation the display show PRESENT SENSOR CALIBRAT. DONE or FAIL.
3.9.7 Printhead Type Detected
This item indicates the print head type installed on the printer (intelligent print head or not
intelligent print head).
3.9.8 Counters Menu
Pressing the Enter function key, when this function is displayed, you gain access to two submenu:
- DISPLAY COUNTERS: press Enter function key and, on the first line of the display, appears
USER COUN: nn and in the second line appears RESERVED: nn.
The value displayed near the message USER COUN shows the quantity of printed labels after the
last user reset; RESERVED, instead, shows the absolute quantity of printed labels (in meters).
Pressing the Scroll function key to enter in:
- RESET USER COUNTER?: press Enter function key and, on the display, appears RESET IN
PROGRESS for a few second. This selection sets the user counter of the printed labels to zero.
63