Compuprint 6314 - Manual (Page 25)

Compuprint 6314/6414 - User Manual
2.3 Printer Options
2.3.1 Tear-Off And Tear-Off Strip
Tear Off mode is where each label is printed and then positioned over the tear bar and waits for the
user to remove it before the next label is printed.
In Tear-Off Strip mode, labels are printed until the print buffer is empty and then the last label is
positioned over the tear bar for removal.
When using Tear-Off or Tear-Off Strip media handling, the user will need to tear the label
downward against the tear bar.
Fig. 18 – Front tear off plate
25