Comtech EF Data DD240XR Rev Е - Manual (Page 40)

User Interfaces DD240XR High-Speed Digital Demodulator
4-20 MN-DD240XR – Rev. E
MENU NAVIGATION: {STANDARD, FLOATING}
Standard: This setting has a fixed starting point for all
sub-menus.
Floating: Sub-menus are floating, always returning to the
last menu that was accessed.
REMOTE PORT (Menu):
ADDRESS: Sets the multi-drop address of the remote port.
BAUD RATE: {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
Allows user to set the remote port baud rate for Terminal
and Computer Mode.
TCP/IP (Menu): (Remote Protocol Only)
BOOT MODE: {Default, NonVol, Bootp}
Default: If no Ethernet Interface is to be used. No IP
Address or mask changes will be allowed.
NonVol: Stores and uses IP Mask and addresses as
provided by the user.
Bootp: At boot time, use Bootp Protocol to get names,
masks, and IP Addresses of the modem, router, and
server.
BOOTp SERVER TAG: {128 – 257, default is 206}
Only used if Bootp is selected in Boot Mode. Should be
consistent with the tag expected by the users Bootp
Server.
MODEM HOST The Host Modem for the network.
IP ADDR MASK: {255.XXX.XXX.XXX}
The IP Address Mask of the local network. The mask is
expressed in a decimal format, and must be a valid
TCP/IP Mask.
255.255.255.128
255.255.252.000
255.000.000.000
This field should be set before changes are made to the
Modem or Router Address.