Comtech EF Data DD240XR Rev Е - Manual (Page 77)

DD240XR High-Speed Digital Demodulator User Interfaces
MN-DD240XR – Rev. E 4-57
radTerrEthUdpPortDest OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the destination UDP port for the Gig Ethernet card."
::= { interface 15 }
radTerrEthBlkMode OBJECT-TYPE
SYNTAX INTEGER {
aligned(0),
notAligned(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Selects block align mode for the Gig Ethernet card."
::= { interface 16 }
radTerrEthFecColL OBJECT-TYPE
SYNTAX INTEGER (4..20)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects FEC Column L for the Gig Ethernet card."
::= { interface 17 }
radTerrEthFecColD OBJECT-TYPE
SYNTAX INTEGER (4..20)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects FEC Column D for the Gig Ethernet card."
::= { interface 18 }
-----------------------------------------------------------------------------
-- monitor
eventsReset OBJECT-TYPE
SYNTAX INTEGER {
ignore(0),
perform(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
When a perform(1) is sent the event buffer will be cleared
"
::= { monitor 1 }
plus5Volts OBJECT-TYPE
SYNTAX RadVoltageLevel (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
+5V monitor with implied decimal point.
Example: a value of 51 represents +5.1 Volts.
"
::= { monitor 2 }
plus12Volts OBJECT-TYPE
SYNTAX RadVoltageLevel (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION