Comtech EF Data DD240XR Rev Е - Manual (Page 43)

DD240XR High-Speed Digital Demodulator User Interfaces
MN-DD240XR – Rev. E 4-23
for a SNMP host. Messages will only be sent if the unit
has been authorized to do so.
RD COMMUNITY: {16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is requested by a V1/V2 SNMP
message.
RDWR COMMUNITY: {16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is being changed by a V1/V2
SNMP message.
USER 1-4 (Menus):
{16 characters of name}
These menus are only displayed when SNMP VERSION
is set to V3.
This device supports five users. The first user is the
public user which is always available and cannot be
configured. The other four users are configured via the
following sub menu items.
The user entries are decorated with the current user
name.
User1 reset value = Viewer-md5
User2 reset value = Viewer-sha
User3 reset value = Oper-md5
User4 reset value = Oper-sha
The reset values have been selected to reflect the
combinations of access groups and authentication
methods being used.
The names may be changed by pressing enter and using
the arrow keys to select from characters.
ACCESS GROUP: {NO GROUP, OPER, VIEWER, DEV OPER, NET
OPER, DEV VIEWER, NET VIEWER}
User1 reset value = VIEWER
User2 reset value = VIEWER
User3 reset value = OPER
User4 reset value = OPER
Each access group requires a context, authentication
and privacy level. If a device operation group is selected
and the authentication or privacy level requirement is not
met, any SNMP messages received will be rejected.