4 telnet interface – Comtech EF Data HPOD User Manual
Page 52
HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier
MN/HPOD.IOM
Ethernet-based Remote Product Management
Revision 8
4–4
The HPOD uses these Faults v1 traps and v2 notifications:
Faults SNMPv1 traps:
Faults SNMPv2 notifications:
hpod24VPowerSupplyStatusV1
62476201
hpod24VPowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.1
hpod15VPowerSupplyStatusV1
62476202
hpod15VPowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.2
hpod10V1PowerSupplyStatusV1
62476203
hpod10V1PowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.3
hpod10V2PowerSupplyStatusV1
62476204
hpod10V2PowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.4
hpod7V5TPowerSupplyStatusV1
62476205
hpod7V5TPowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.5
hpod5VPowerSupplyStatusV1
62476206
hpod5VPowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.6
hpodN5VPowerSupplyStatusV1
62476207
hpodN5VPowerSupplyStatus
1.3.6.1.4.1.6247.62.1.3.1.7
hpodFan1StatusV1
62476208
hpodFan1Status
1.3.6.1.4.1.6247.62.1.3.1.8
hpodFan2StatusV1
62476209
hpodFan2Status
1.3.6.1.4.1.6247.62.1.3.1.9
hpodTemperatureStatusV1
62476210
hpodTemperatureStatus
1.3.6.1.4.1.6247.62.1.3.1.10
hpodShutdownStatusV1
62476211
hpodShutdownStatus
1.3.6.1.4.1.6247.62.1.3.1.11
hpodIICStatusV1
62476212
hpodIICStatus
1.3.6.1.4.1.6247.62.1.3.1.12
hpodFwdPwrStatusV1
62476213
hpodFwdPwrStatus
1.3.6.1.4.1.6247.62.1.3.1.13
hpodBUCStatusV1
62476214
hpodBUCStatus
1.3.6.1.4.1.6247.62.1.3.1.14
hpodRefStatusV1
62476215
hpodRefStatus
1.3.6.1.4.1.6247.62.1.3.1.15
hpodSummaryFaultV1
62476216
hpodSummaryFault
1.3.6.1.4.1.6247.62.1.3.1.16
4.4
Telnet Interface
The HPOD has a Telnet interface for the equipment M&C operations. Log in to the Telnet
interface at the Administrator level or Read/Write level. An example of the login process is
shown here:
After you log into the Telnet interface as the Administrator, you can use the standard remote
control interface, defined in Chapter 5. SERIAL-BASED REMOTE PRODUCT MANAGEMENT, as
shown here: