Comtech EF Data HPOD User Manual
Page 66
Advertising
HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier
MN/HPOD.IOM
Ethernet-based Remote Product Management
Revision 8
4–18
SC/13320 Board Firmware Version (read-only)
This read-only section identifies the current Boot, Bulk1, and Bulk2 firmware loads.
4.5.5.3.3
Config | Redundancy Page
See Appendix B. 1:1 AND 1:2 REDUNDANCY OPERATION for details on using this
page to configure the HPOD for redundant operations.
Figure 4-6. Config | Redundancy page
At any time, click [Refresh] to update this page and see the most recent data.
Advertising