Digi CM - Manual (Page 111)

System Administration
Chapter 14 111
Introduction
This chapter describes how to perform tasks performed either by root or the
system administrator. These tasks fall under the general heading of system
administration and include firmware upgrades, resetting the unit to defaults,
and disaster recovery procedures.
Upgrading the Firmware
Web Interface
The web interface allows you to download the latest firmware version to a
Digi CM . The latest firmware can be found at: http://cm.digi.com. Do the
following to upgrade the firmware:
1. Access the web interface.
2. Under the System administration heading, choose Firmware upgrade.
3. Choose the Browse button and locate the firmware download.
4. Choose Upgrade . The Digi CM will automatically reboot when the upgrade is
complete.
Note: Do not powercycle the unit for five minutes after the firmware upgrade is
completed, as the unit is writing the firmware to flash!
Chapter 14 S y s t e m A d m i n i s t r a t i o n