Digi CM User Manual
Page 99
Advertising
Power Controller
Chapter 12
99
2. Click either the Port # or the power controller title.
The Power controller statistics screen appears to show the Alarm threshold,
Current temp, Circuit breaker condition, RMS voltage, RMS current, and Max
current detected.
The
Clear
button will reset the Max current detected to 0.0 amps. From this
screen click Outlets.
3. Select the outlet number that you would like to manage.
Note:
The screen below shows that all the outlets are powered On and outlet 3 is
Rebooting, therefore the Backup Tape Device is power cycling.
4. Click
Power on
,
Power off
, or
Reboot
depending on what you want the outlet to do.
Advertising