Digi CM User Manual
Page 131
Configuration Menu
Chapter 16
131
Viewing A Sniff Session
A sniff user enters a sniff session by starting a Telnet session on a specified
port. In the following example, a sniff user telnets to port 7 of a Digi CM. From
the command prompt enter the following command:
telnet 192.168.100.42 7007
1. Log in and enter your password
2. Enter the port escape sequence.
When sniff users login to a port from a Telnet session, a sniff session menu is
displayed with your permitted options. The first user (with port access rights) to
login to the port is in the main session.
The next user (with port access rights) to enter the port will be given the option
to take over the main session. This user is given the option to take over the
main session by either terminating the first user or switching the first user to
sniff (read only).