Digi CM - Manual (Page 122)

User Administration
122 Chapter 15
The ssh break can changed from the Web UI or config menu under
Serial ports > Configuration >
Host mode configuration > SSH break sequence
Additional binaries or applications can be added to /usr2 such as:
• crontab
• netstat
• fuser
To download these utilities go to: http://ftp.digi.com/support/utilities/digicm/
User Administration
Add, edit or delete users with the Digi CM command line interface.
• Add user
Example: useradd -d /tmp [-g groupid ] [-s shellprogram ] [username]
groupid = Options are: Sys admin, Port admin, or Standard User.
500 = Sys admin
501 = Port admin
502 = Standard User
These are the three types of groups supported by the Digi CM. You
must use one of these.
shellprogram = Options are: CLI (Command Line Interface), Config menu,
Port access menu, or Custom menu.
/bin/bash = CLI
/bin/editconf = Configuration menu
/bin/vts.master = Port access menu
/bin/menu = Custom menu
These are the four types of shells supported by the Digi CM. You must
use one of these four.
• passwd [username]
• saveconf
• applyconf
• Modify user
Example: usermod -d /tmp [-g groupid] [-s shellprogram] [username]
Syntax is the same as it is for useradd mentioned above.
• saveconf
• applyconf
• Delete user
Example: userdel[username]
• saveconf
• applyconf