Digi CM - Manual (Page 18)

Port Escape Menu
18 Chapter 1
4. Enter the letter of the port escape sequence.
The following table describes the fields and the operations for the port escape
feature. You will only see the fields allowed for your permissions.
Description of Fields
Escape
Sequence
Ctrl+
Description of Action Occurrence
m take over main session (read/write)
only presented to users with read/
write access upon entering a
session
s enter as a slave session (read only)
only presented to users with read/
write access upon entering a
session
b send break not functional for sniff users
l show last 100 lines of log buffer must enable logging for this option
d disconnect a sniff session only functional to admin
a send message to port user(s) not available to sniff users
r reboot device using power-switch
only if power management is
available on this port
p power device on/off
(show only on or off) only if power
management is available on this port