Digi CM - Manual (Page 68)

Configuring Authentication for the Web Server
68 Chapter 7
server as the primary authentication server and Local authentication if the
primary authentication method fails.
Note: Remote authentication to Port access menu can be obtained from Serial port >
Configuration > Port access Menu
5. Fill in the appropriate fields.
6. Choose Save & apply changes.
Configuring Authentication for the Web Server
1. Access the web interface.
2. Choose Network > Web server configuration.
The following screen appears.
3. Choose an authentication method and then Save & apply .
When using remote authentication for the web server, such as Radius,
TACACS+, LDAP or Kerberos, you must also be added to the local
database. The user password must be different from local authentication
or it will do local authentication instead of remote. See "Administering
Users" on page 59 for details.
Once your password is approved by the authentication server, the Digi CM
uses the local permission rights to provide proper access privileges for you
to ports and the configuration.