Digi CM - Manual (Page 23)

Getting Started
Chapter 2 23
5. Select an authentication method for accessing the web interface. The
default is local.
6. To save and apply changes, click Save & apply .
Configuring for SSH
Accessing the Digi CM’s command line via SSH is enabled by default
(TCP port 22).
Options
The Port Access Menu and individual ports can be configured for SSH.
Configuring the Port Access Menu for SSH
1. Access the web interface.
2. Log in as root, admin, or a member of the port administration group. The
default password for root is dbps , and the default password for admin is
admin .
3. Under Serial port > Configuration > Port access menu configuration .
The Port access configuration menu appears.
The Digi CM
supports Blowfish
and 3DES
encryption
methods for SSH.