Digi CM - Manual (Page 134)

Dial-in Terminal Server Access
134 Chapter 16
5. Use the ESC key to return to the main menu.
6. Choose Save changes.
Dial-in Terminal Server Access
Individual serial ports on the Digi CM can be configured for a dial-in terminal
server access. To use dial-in terminal server access, an external modem is
first attached to a serial port on the Digi CM and then the serial port is
configured for dial-in terminal server mode. In the illustration below, port 7 is
configured for dial-in terminal server mode.
In terminal server mode, you are connected directly to a server.
To configure a serial port for a dial-in terminal server, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number and then Host Mode Configuration.
4. Choose Dial-in Terminal Server and configure the other configuration
parameters.