Adding a wireless lan card – Digi CM User Manual
Page 29
Installing and Configuring PC Cards
Chapter 3
29
4. Enter the appropriate parameters in the configuration menu.
5. Click
Save & apply
.
Note:
If DHCP is active the IP address will appear after the configuration is saved and
applied.
Adding a Wireless LAN Card
To install and configure a wireless LAN card on the Digi CM, do the following.
1. Insert the card into the PC slot.
2. Access the web interface.
3. Under the PC card heading, click Configuration.
Note:
The card is automatically discovered and a configuration menu is displayed.
4. Click
Configure the detected card
.
5. Enter the appropriate parameters in the configuration menu.
WEP is the acronym for Wired Equivalent Privacy and is a security protocol
for wireless LANs using encryption to protect data transfers. If you are
unsure of the settings for the wireless card, see your network administrator.