Digi CM - Manual (Page 22)

Configuring HTTP and HTTPS
22 Chapter 2
4. At the login prompt, log in as admin . The default password for admin is
admin .
The Configuration menu appears.
5. Enter the number for Network configuration.
6. Enter the number for IP configuration.
7. Enter the appropriate parameters for the IP settings.
8. Press ESC when done to return to the main configuration menu.
9. Enter the number to exit and apply changes.
Changes are saved and applied immediately. There is no need to reboot.
Configuring HTTP and HTTPS
By default HTTP and HTTPS are enabled on the Digi CM device. To modify
these settings, do the following:
1. Enter the IP address for the Digi CM in a web browser’s URL.
2. Under the left navigation bar, Network > Web server configuration
3. Select Enabled or Disabled.
4. Set the desired refresh rate for statistics, connection, and power control
data. The default value is 10 seconds.